# What Is Polyester?
By Activewear Manufacturer, updated November 17, 2026, 15 minute read

Polyester is a synthetic fiber made from a plastic polymer. The most common type is polyethylene terephthalate, usually shortened to PET, the same family of material used for drinks bottles. The polymer is melted and pushed through very fine holes to form long, continuous filaments, which are then turned into yarn and knitted or woven into fabric. The result is a light, strong, quick drying textile that holds color well and keeps its shape.

Polyester is the most widely produced textile fiber in the world. It is used in everything from home textiles and outerwear to linings, uniforms and sportswear. In activewear, it is the base fiber for most team kits, running and cycling wear, gym shorts and printed pieces, and it is often blended with elastane for stretch.

The word polyester describes a chemical family rather than a single material. All polyesters are polymers joined by ester bonds, but the one used for clothing is almost always PET. When a garment label says polyester, that is what it means.

## What is polyester made of?

Virgin polyester is made from two raw materials: purified terephthalic acid and monoethylene glycol. Both are produced from chemicals refined from crude oil and natural gas. They react together under heat to form long polymer chains, which are cooled and cut into small chips or fed straight into spinning machines as a melt.

Recycled polyester is made from the same polymer, recovered from used bottles, packaging or textile waste. The material is cleaned, shredded and either melted again directly or broken back down into its chemical building blocks and rebuilt. Either way, the fiber that comes out is still PET and behaves like virgin polyester in a garment.

Polyester fabric for activewear often contains other fibers too. A blend of polyester with a small share of elastane gives stretch and recovery. Blends with cotton give a softer, more natural feel for lifestyle pieces. The label shows the fiber content by percentage, so you always know what you are wearing.

### What is polyester made out of in simple terms?

In simple terms, polyester is plastic turned into thread. The same kind of material that forms a clear bottle can be melted and drawn into fibers finer than a human hair, and those fibers are spun into yarn. A polyester shirt and a polyester bottle are made of the same substance in a different form.

## Where does polyester come from?

Polyester as a textile fiber was developed in Britain in the early 1940s by chemists working on the polymer research that had already produced nylon in the United States. Commercial production began after the Second World War, and polyester fibers spread quickly through the 1950s and 1960s because they were cheap to produce, easy to care for and resistant to creasing.

Early polyester had a reputation for feeling stiff, shiny and hot. That reputation came from thick filaments and simple fabric structures. Modern polyester uses much finer filaments, textured yarns and better knitting and finishing, which is why today's performance fabrics feel soft and breathable in a way the early fabrics did not.

Today, most of the world's polyester is produced in Asia, with large production also in the Middle East, Europe, the Americas and Türkiye. The fiber is made in chemical plants, then sold to spinning and knitting mills that turn it into fabric.

## Is polyester a synthetic fiber?

Yes. Polyester is a fully synthetic fiber, meaning it is made from chemicals rather than from a plant or animal source. It is different from cellulose fibers such as viscose, modal and lyocell, which are made from wood pulp that has been dissolved and reformed. Those are often called semi synthetic or regenerated fibers. Polyester is also different from natural fibers such as cotton, linen and wool, which are grown.

Being synthetic is not a weakness in sportswear. Synthetic fibers can be engineered for strength, fineness, cross section shape and color, which lets mills design fabrics that dry fast, move sweat, stretch and survive frequent washing.

### Is polyester natural?

No. Polyester does not occur in nature. Even recycled polyester, made from used bottles or old garments, is still a synthetic polymer. If you want a natural fiber, cotton, wool, linen and silk are the main choices, though none of them performs like polyester for intense training.

## How is polyester fabric made?

Polyester fabric goes through several steps between the chemical plant and the cutting table. Each step changes how the final fabric feels and performs.

### How is the polymer made?

The raw materials are combined in a reactor under heat and pressure. The molecules link into long chains, forming the PET polymer. The molten polymer is either cooled and cut into chips for later use or sent directly to spinning. Additives can be included at this stage, for example to make the fiber more matte or to change how it takes dye.

### How are the fibers spun?

The polymer is melted and pushed through a spinneret, a metal plate with many tiny holes. As the streams leave the holes, they cool and harden into filaments. The filaments are then stretched, which lines up the polymer chains and makes the fiber much stronger. The number and shape of the holes decide how fine the filaments are and what cross section they have. Round, trilobal and channelled shapes give different shine, softness and moisture movement.

### How is the yarn prepared?

For activewear, filaments are usually kept long and twisted or textured into continuous filament yarn. Texturing adds crimp and bulk, so the yarn feels softer and the fabric traps less heat. Some polyester is cut into short staple lengths and spun like cotton, which gives a more natural, matte feel. Polyester can also be combined with elastane in the yarn itself for stretch.

### How is the fabric knitted or woven?

Most activewear polyester is knitted, because knits stretch and move with the body. Interlock, single jersey, mesh, rib and air knit structures are all common. Woven polyester is used for stretch woven shorts, jackets and outer layers. The knitting machine, the yarn and the stitch structure decide the weight, opacity and stretch of the fabric.

### How is polyester dyed?

Polyester is dyed with disperse dyes at high temperature and pressure, which open the fiber enough for the dye to enter. Once the fiber cools, the dye is locked inside. This is why polyester has very good color fastness and why bright colors stay bright after many washes. It is also why polyester takes sublimation printing so well, as explained below.

### How is the fabric finished?

After dyeing, the fabric is washed, dried and heat set to fix its width and stabilize its shape. Finishes can be added at this stage, such as a moisture management finish, an anti odor finish or brushing for a softer face. Heat setting is one reason polyester barely shrinks in normal washing.

## What types of polyester yarn are used in clothing?

Not all polyester yarns are the same. The type of yarn decides much of what a fabric feels like before it is even knitted.

| Yarn type | What it is | Where it is used |
| --- | --- | --- |
| Filament yarn | Long continuous filaments, smooth and strong | Performance knits, linings, team kits |
| Textured filament | Filaments crimped for bulk and softness | Training tops, leggings, soft knits |
| Microfiber | Very fine filaments, soft and dense | Premium activewear, smooth leggings |
| Spun polyester | Short fibers spun like cotton, matte and soft | Lifestyle pieces, cotton blends |
| Shaped cross section | Filaments with channels or lobes | Moisture management fabrics |
| Recycled polyester | Made from recycled PET | Sustainable ranges in every category |

## What does polyester fabric feel like?

Modern polyester can feel very different depending on the yarn and knit. A smooth interlock made from microfiber feels soft and cool, almost silky. A textured jersey feels light and slightly dry. An air knit used for team jerseys has a structured, sporty hand. A brushed polyester feels warm and fluffy on the inside.

Polyester generally feels drier against the skin than cotton when you sweat, because it absorbs very little water. Some people find pure polyester slightly less soft than nylon, which is why premium leggings often use nylon instead. For team kits, running wear and printed pieces, polyester's feel is usually exactly what is wanted.

## Why is polyester used so much in activewear?

Polyester combines the properties that sportswear needs at a reasonable price. It is light, strong and dries quickly. It holds its shape and color. It can be knitted into almost any structure, from fine mesh to dense interlock. It takes sublimation printing, which lets teams and brands print full color designs across the whole garment. And it is available in recycled form with the same performance.

For a manufacturer, polyester is also predictable. It cuts cleanly, sews well with the right needles and stretch threads, and behaves consistently from one fabric lot to the next. Our [activewear fabrics](https://activewearmanufacturer.net/activewear-fabrics/) page shows where we use polyester and where we prefer other fibers.

The main reasons polyester appears in so many training pieces are:

- Quick drying, because the fiber absorbs very little water.

- Good strength and abrasion resistance for its weight.

- Excellent color fastness and the ability to take sublimation print.

- Shape stability, with very little shrinking or stretching out.

- A wide choice of knit structures, weights and finishes.

- Recycled versions that perform like virgin fiber.

## Is polyester breathable?

Polyester fiber itself does not absorb air or water, but polyester fabric can be very breathable. Breathability depends mostly on the fabric structure: how open the knit is, how fine the yarns are and whether there are mesh zones. A light polyester mesh or air knit lets heat and moisture escape quickly, which is why it is used in football and basketball jerseys. A dense polyester interlock breathes less but gives more coverage and opacity.

The old idea that polyester is hot comes from thick, flat filament fabrics of the past. Modern performance polyester uses textured and shaped yarns that create small air channels, and it is often combined with mesh panels where the body produces the most heat.

## Does polyester wick moisture?

Yes, well designed polyester fabrics wick moisture effectively. Because polyester absorbs very little water, sweat does not soak into the fiber. Instead, it travels along and between the filaments by capillary action, spreads across the outer surface and evaporates. Shaped filaments with channels, fine microfibers and moisture management finishes all speed this up.

This is the main reason polyester feels drier than cotton during hard training. A cotton top absorbs sweat and stays heavy and wet, while a polyester top moves sweat outward and dries quickly. Our guide on moisture wicking fabric explains the process in more detail.

## Is polyester stretchy?

Polyester fiber on its own has very little stretch. Knitted polyester fabrics have some natural give because of the loop structure, but they do not recover fully when pulled hard. For fitted activewear, polyester is blended with elastane, which provides stretch and recovery in both directions. A polyester and elastane interlock is a common choice for leggings, bike shorts and fitted tops, especially when the design will be printed.

Some polyester yarns are also made with a built in stretch, using two types of polyester polymer side by side in each filament. These give a softer stretch than elastane and are used in some woven shorts and outer layers.

## Does polyester shrink?

Polyester shrinks very little in normal washing and drying, because the fabric is heat set during finishing. Most shrinkage that people notice in polyester garments comes from very hot drying, which can soften the fibers, or from the elastane in a blend, which is more sensitive to heat than the polyester itself.

Before bulk production, we wash test the fabric and measure it, so that any shrinkage is known and the pattern can allow for it. Washing activewear at moderate temperatures and avoiding very hot dryers keeps both the polyester and the elastane in good condition.

## Is polyester waterproof?

Polyester is water resistant but not waterproof. The fiber absorbs very little water, so a tightly woven polyester fabric sheds light rain better than cotton. To be waterproof, a fabric needs a coating or a membrane that blocks water while letting vapor escape, and the seams need to be taped. Polyester is a common base for waterproof jackets, but the fabric alone is not enough.

For training layers, a light woven polyester with a water repellent finish is often a good balance. It sheds a shower and blocks wind, while staying light and breathable enough to run in.

## Does polyester hold odor?

Polyester can hold odor more than natural fibers. Body oils and the bacteria that break down sweat cling to synthetic fibers, and some odor can remain even after washing. This is a well known issue with polyester sportswear.

There are several ways to reduce it. Anti odor finishes slow the growth of bacteria on the fabric. Blends with modal or other cellulose fibers can help. And washing soon after training, turning garments inside out and avoiding fabric softener, which coats fibers and traps odor, makes a real difference. Our guide on washing workout clothes covers this in detail.

## How does polyester take color and print?

Polyester takes color exceptionally well. Disperse dyes enter the fiber under heat and are locked inside when it cools, which gives bright, lasting colors. This same principle makes polyester the ideal fabric for sublimation printing.

In sublimation, a design is printed onto paper with special inks, then pressed against polyester fabric under heat. The inks turn into a gas, enter the opened fibers and become part of them. The result is a print with no feel on the surface, which does not crack or peel and stretches with the fabric. This is how most modern football, basketball, cycling and esports jerseys are made. See our [sublimated sportswear](https://activewearmanufacturer.net/sublimated-sportswear-manufacturer/) page for how we print team kits.

Sublimation works best on white or light polyester and on fabrics with a high polyester content. On cotton or nylon, the dye does not bond, so other print methods are used.

## Is polyester durable?

Yes. Polyester is one of the most durable textile fibers for its weight. It resists abrasion, stretching and tearing, keeps its shape and survives many washes. That durability is why it is used for team kits that are washed after every match, [school sportswear](https://activewearmanufacturer.net/school-sportswear/) that is worn every week and training gear that sees hard use.

Durability in a garment also depends on the fabric construction and the sewing. A light mesh is less resistant to snagging than a dense interlock, and seams must be sewn with stretch threads so they do not break when the fabric stretches. A durable fiber in a poorly made garment will still fail early.

## Does polyester pill?

Polyester can pill, especially in spun polyester and in blends with cotton. Pills form when short fiber ends work loose and tangle into small balls. Because polyester fibers are strong, the pills do not break off easily, so they stay on the surface.

Continuous filament polyester pills much less than spun polyester, because there are fewer loose ends. Anti pill finishes and tighter knits also help. We test pilling on fabrics before bulk production, especially for leggings and areas that rub, such as the inner thigh.

## How does polyester compare with other activewear fibers?

Each fiber has a role. The table below compares polyester with the other fibers most often used in activewear.

| Fiber | Feel | Drying | Print | Typical use |
| --- | --- | --- | --- | --- |
| Polyester | Light, dry, can be very soft as microfiber | Very fast | Takes sublimation | Team kits, running, shorts, printed pieces |
| Nylon | Soft, smooth, slightly cool | Fast | No sublimation | Premium leggings, sports bras, yoga wear |
| Cotton | Soft, natural | Slow | Screen print, embroidery | Lifestyle and low intensity pieces |
| Modal | Very soft, drapey | Moderate | Limited | Relaxed yoga and lifestyle layers |
| Elastane | Not used alone | Not applicable | Not applicable | Added for stretch in almost every fitted piece |

For a closer look at the two main synthetic fibers, see our guide on polyamide versus polyester.

## Is polyester safe to wear?

Polyester fabrics that meet chemical safety standards are safe to wear for nearly everyone. As with any textile, the risk comes less from the fiber and more from dyes, finishes and residual chemicals. That is why many brands and retailers require fabrics tested to OEKO-TEX Standard 100, which checks every component against limits for harmful substances.

People with very sensitive skin sometimes prefer natural or cellulose fibers next to the skin. For most people, a well made polyester activewear piece is comfortable and safe, and it is worn by millions of athletes every day. Our guide on [activewear certifications](https://activewearmanufacturer.net/certifications/) explains the main standards.

## Does polyester shed microplastics?

Yes. Like other synthetic fibers, polyester releases tiny fibers when it is washed, and some of these reach waterways. The amount depends on the fabric: spun yarns and brushed fabrics shed more than smooth filament knits, and new garments shed more in the first washes.

Brands and manufacturers can reduce shedding by choosing filament yarns and tighter knits and by washing fabrics during finishing. Wearers can help by washing full loads at lower temperatures, using shorter cycles and using a washing bag or filter that catches fibers. This is an active area of research, and better fabrics and filters are appearing every year.

## Is recycled polyester the same as virgin polyester?

In the garment, mostly yes. Recycled polyester is chemically the same PET polymer, and fabrics made from it perform like virgin polyester: they dry fast, hold color and take sublimation print. The difference lies in where the raw material comes from, which lowers the use of new fossil based material.

Recycled claims need proof. Certified recycled fabrics come with documents that trace the recycled content through the supply chain, so a brand can make a specific claim. Our guide on recycled polyester in activewear explains the sources, the certifications and the trade offs.

## Which activewear products use polyester?

Polyester appears across almost every activewear category, but it leads in some more than others.

| Product | Why polyester is chosen |
| --- | --- |
| Football, rugby and basketball kits | Takes sublimation print, dries fast, survives frequent washing |
| Running tops and shorts | Light, quick drying, breathable in mesh and air knit |
| Cycling jerseys and bibs | Prints well, dries fast, holds shape under load |
| Gym shorts | Light knits and stretch wovens that dry quickly |
| Printed leggings | Polyester and elastane takes full color prints |
| Training layers | Light woven polyester blocks wind and sheds light rain |
| Esports and fan style jerseys | Bright sublimated designs with names and numbers |

## How do you care for polyester activewear?

Polyester is easy to care for, but a few habits keep it looking and smelling good:

- Wash soon after training, rather than leaving damp garments in a bag.

- Turn garments inside out to protect prints and reduce pilling.

- Use cool or warm water rather than hot, especially for blends with elastane.

- Skip fabric softener, which coats fibers and traps odor.

- Air dry or tumble dry on low heat.

- Do not iron sublimated prints at high heat.

Polyester dries quickly, so air drying is usually enough and is kinder to the fabric than a hot dryer.

## How do you know if a garment is polyester?

The easiest way is to read the care label, which must show the fiber content by percentage in most markets. In the EU, labels use official fiber names, so polyester appears as polyester. If the label is missing, polyester usually feels smooth and slightly cool, dries very quickly after washing and resists creasing. Those signs are only a guide, though, because nylon and some blends behave similarly.

## What should brands ask a manufacturer about polyester fabric?

If you are planning a range with polyester fabrics, these questions help you get the right fabric and avoid surprises:

- Is the yarn filament, textured, microfiber or spun?

- What is the knit structure and how opaque is it when stretched?

- How much elastane is in the blend, and how well does it recover?

- Will the fabric be printed, and is it suitable for sublimation?

- Is a recycled version available, and with which documents?

- Has the fabric been tested for shrinkage, pilling and color fastness?

- Is the fabric certified to OEKO-TEX Standard 100?

A good manufacturer answers these questions with fabric swatches and test results, not just a fiber name. If you are just starting out, our guide on starting an activewear brand explains how fabric choice fits into the first collection.

## How do we work with polyester in our production?

We use polyester wherever it is the best fiber for the job: sublimated team kits, running and cycling wear, gym shorts, printed leggings and training layers. We source polyester knits and wovens from mills around Istanbul, including recycled and OEKO-TEX certified options, and test each fabric for opacity, stretch, shrinkage and color before it reaches the cutting table.

Because our printers and mills are a short drive away, a print strike off or a fabric swatch reaches us in hours, not weeks. That is how a polyester kit goes from artwork to approved sample quickly and from sample to bulk without changes. You can see the full range of what we make on our [sportswear manufacturing](https://activewearmanufacturer.net/sportswear-manufacturer/) page. Polyester made into sportswear in Istanbul gives you bright prints, fast drying fabrics and kits that look the same on the last wash as on the first match.

## What should you read next?
- [Sustainable activewear](https://activewearmanufacturer.net/sustainable-activewear-manufacturer/)Documented fabric claims.

- [Running apparel](https://activewearmanufacturer.net/running-apparel-manufacturer/)Running shorts and more.

## Ready to sample your range?
Send a sketch, a tech pack or a garment you like. We reply with questions or a written quotation, and your first sample follows in 14 days.

[Get a quote](https://activewearmanufacturer.net/get-a-quote/)
