Leggings, sports bras, gym wear and team kits cut and sewn in Istanbul

Sports Bra Manufacturer

A sports bra is the most technical piece in most activewear ranges. Support, comfort and fit depend on the fabric, the band, the cups and the straps working together. We make sports bras for activewear labels and studios in every support level, from soft crops for yoga to high impact bras for running and conditioning.

Sports brasLow to high support
Support
Low, medium and high impact
Cups
Unpadded, removable pads, molded cups
Backs
Racerback, cross back, open back, adjustable
Closures
Pullover, hook and eye, front zip
Fabrics
Double knit stretch with power mesh lining
Minimum order
Agreed per style and color

How do you choose the support level for a sports bra?

Support level follows the sport. Low support bras are for yoga, pilates and stretching, where the body moves slowly. Medium support suits gym training, cycling and walking. High support, often called high impact, is for running, jumping, HIIT and team sports, where breast movement is greatest and discomfort comes fastest.

Support comes from more than one part. A firm underband carries most of the load. Compression from a tight, lined front holds the breasts against the chest, and encapsulation from separate cups holds each breast on its own. High impact bras usually combine both, with wider straps and an adjustable back. A low support crop relies mainly on fabric and band.

We help you decide which support levels your range needs from the activities your customers do, then build each bra from a pattern for that level rather than adding pads to one base style.

Which sports bra constructions do we make?

ConstructionSupportTypical use
Single layer cropLowYoga, stretching, lounging
Lined pullover with removable padsLow to mediumStudio classes, gym, everyday
Racerback or cross back compressionMediumGym, cycling, conditioning
Longline braMediumGym and lifestyle, worn as a top
Molded cup with hook and eye backHighRunning, HIIT, team sports
Front zip braMedium to highEasy on and off, popular for larger cup sizes
Adjustable strap encapsulation braHighLarger cup sizes and high impact sport
Seamless knit braLow to mediumRibbed, body mapped ranges

The names vary from brand to brand. What matters for production is the layers, the cups, the band and the closure, which we agree on the tech pack before sampling.

Which parts make a sports bra work?

Outer fabric
A double knit or interlock with 20 percent elastane or more gives shape and hold. For softer low support bras, a brushed nylon blend feels gentler.
Lining
Power mesh or a second layer of stretch fabric adds compression and gives removable pads a pocket to sit in.
Underband elastic
A wide, plush backed elastic carries most of the support. It must grip without digging in, and it must recover after washing.
Cups and pads
Removable foam pads, sewn in pads or molded cups. Molded cups are shaped in heated molds and give the most even support in high impact styles.
Straps
Wider straps spread the load. Adjustable straps with slides help the bra fit more bodies in fewer sizes.
Closures
Hook and eye backs, front zips with a guard behind the zip, or no closure at all for pullover styles.

Can you make a custom padded sports bra?

Yes. Most of the bras we make for labels have pads, either removable or sewn in. Removable pads let the wearer choose their shape and make washing easier, but they can fold or shift in the wash. Sewn in pads stay in place and give a cleaner look, and they suit brands that want one consistent silhouette.

The pad shape is chosen for the neckline and the cup size range. A low scoop neck needs a different pad from a high neck bra, and larger sizes need deeper pads, not just bigger ones. We source pads in several thicknesses and densities and fit them on the sample before bulk.

If you want a molded cup bra, the molds are made to your cup shape and size range. That adds setup cost, which is shared across the run, so molded cups make the most sense for core styles that will be reordered.

How are sports bras sized and fitted?

Most activewear labels size bras like their other garments, from XS to XL or beyond, because it keeps the range simple for customers. Some high impact styles are sized by band and cup, like everyday bras, to fit larger cup sizes properly. We can work either way, and the choice affects the number of sizes, the pad stock and the quantity per size.

Fitting happens on real bodies. We fit the sample on a model in the base size and ask you to try it during exercise, not only standing still. The points we look at are band position, strap slip, cup gaping, pad position and how the bra feels after half an hour of movement. Our guide on sports bra sizing and fit explains what to check when you try your sample.

Do we make sports bras in bulk for wholesale buyers?

Yes. Retailers, studio chains and distributors order sports bras in bulk under their own label, often alongside matching leggings and shorts. Bulk sports bras are cut from the same fabric lot as the bottoms in the same color, so the set matches.

For larger repeat programs, pads, elastics and hooks are booked ahead so a reorder does not wait for trims. Bras are packed with pads in place, folded so the cups keep their shape, and labeled by size and color. If you sell bras and leggings as sets, see our page on matching activewear sets.

Can sports bras be made for larger cup sizes?

Yes, and it is one of the places where a good pattern matters most. A bra graded straight up from a small size gets wider straps and a bigger cup, but the band stays too weak and the neckline too low for a larger bust. We build larger sizes with a deeper underband, wider and padded straps, higher coverage at the side and front, and either encapsulated cups or a firmer lining.

For high impact styles in larger cup sizes, band and cup sizing works better than letter sizing, because two people with the same band can need very different cups. That means more sizes and more pads to stock, so it is usually worth starting with one band and cup sized hero style and keeping the rest of the range in letter sizes. We fit larger sizes on a model in that size, not only on the base size, before you approve the sample.

What does it cost to manufacture a sports bra?

A sports bra has more components than its size suggests: outer fabric, lining or power mesh, elastic, straps, pads or molded cups, and sometimes hooks, slides or a zip. Each adds material and sewing time, so a high impact bra with molded cups and an adjustable back costs considerably more to make than a single layer crop.

The other drivers are the same as for any activewear piece: fabric quality, decoration, quantity per color and packing. Pads are bought in their own minimums, and molds for molded cups are a one time cost shared across the run. We quote per piece in US dollars, euros or pounds sterling once the construction is fixed on the tech pack, and we point out where a change, such as removable pads instead of molded cups, would lower the price without hurting support.

What do labels ask about sports bra production?

Can a sports bra be made without any hardware?

Yes. Pullover styles have no hooks or zips. Support comes from the band, the fabric and the lining.

Do you make nursing sports bras?

Yes. Nursing bras with drop down cups or crossover fronts can be developed from their own pattern.

Can the straps be adjustable on a racerback?

Yes. Slides or a hook strap at the back make a racerback adjustable without changing its look much.

How many sizes should a first sports bra range have?

Most labels start with XS to XL. If your customers need larger cup sizes, a band and cup sized style can be added later.

Can you print or embroider logos on sports bras?

Yes. Small logos are usually heat transfers or silicone prints on the band or straps. Embroidery works on stable areas only.

What is the minimum for sports bras?

The minimum is agreed per style and color and confirmed in writing with the quotation. Molded cups add a setup step that is shared across the run.

Which sports bra guides help before sampling?

    Tell us what your range needs

    A few lines are enough to start. Attach a tech pack, sketches or photos of a garment you want to improve on if you have them.

    1. We reply by email with questions or a written quotation.
    2. Your first sample is cut and sewn in 14 days once fabric and fit are agreed.
    3. Bulk fabric is cut only after you approve that sample on a body.

    We use your details only to answer this enquiry.